Home
Price
£37.07
Inc. VAT £44.48
RRP £59.99
Diameter
85 mm
Downlight Cut Out (mm)
68 mm
Downlight Fixing Type
Twist & Lock (Premium)
Finish
White
Fire Rated?
Yes
Light Fitting Type
Downlight
Technology
LED/Halogen
Type
Light Fitting
Voltage
220-240 Volt
Model: 7678-10
Introducing a quality twist & lock fire-rated canless downlight designed with a GU10 base (lamp not included) at a value price. This IP20-rated fitting has a fire-rated resistance of 90 minutes and has an elegant white finish to deliver a sleek professional look to any commercial or domestic installation. it is fitted with spring clips for safer installation and easy maintenance and has a quick connector for fast and easy installation
Easy Fitting
These fire-rated downlights are a staright fit to your 240 volt mains circuit that dont require a transformer and once you have purchased this fitting all you need to do is cut a 68mm hole, wire in the downlight to the mains and fit the bulb. It's a straight forward process and all that you need is in the box (except the bulb). Its always best to call an electrician if you are not qualified to carry out the installation process.
Fire Rating
You will have peace of mind after fitting this downlighter that your your fire barriers have not been compromised. All plasterboard ceilings provide either 30/60/ or 90-minute protection against fire so its important that you always fit a fire-rated fixture to maintain the fire rating of your ceiling. In the event of fire, this fitting can seal the hole that you cut and reinforce your ceiling to increase the time that it takes for fire to spread through it, in this case, for 30, 60, and 90 minutes of protection.
Choice of coloured light outputs
You my think that as this fitting does not come with a bulb that its not a good thing but its actually not. As it does not come with a bulb you get to choose what LED coulor you would prefer nowadays LEDs are available in warm white, cool white or daylight. Some people prefer a cool crisp light in their bathrooms and on the other hand a warm white in their bedroom or lounge but the choice is yours.
Dimensions
Over the years there have been many sizes of downlights on the market from excessively large that look bit awkward through to thick-rimmed bezels that protrude from the ceiling. With this downlight, its not the case with its sleek white bezel that sits perfectly against the ceiling its 85mm diameter is not so big that you notice a hole in the ceiling and not to small that the light output would be insufficient.
With its 68mm internal diameter all you have to do is use a 68mm hole saw (available on this site) and cut your hole for the fixture to fit snugly into.
Light Fitting Type | Downlight |
---|---|
Technology | LED/Halogen |
Diameter | 85 mm |
Type | Light Fitting |
Finish | White |
Voltage | 220-240 Volt |
IP Rating | IP20 |
Recessed Depth | 90 |
Fire Rated? | Yes |
Downlight Fixing Type | Twist & Lock (Premium) |
Operating Temperature | -20°C to +45°C |
Warranty | 3 Years |
Downlight Cut Out (mm) | 68 mm |
Lamp Type Required | Reflector/Spotlight |
Lamp Cap/Base Required | GU10 |
For Multi Pack of 10 x White Canless GU10 Fire Rated IP20 Downlight
Instruction Manual Instruction Manual | |
Spec Sheet Spec Sheet |
We make every effort in answering your questions.